Online Store
Rentals
New Equipment
Refurbished
Leasing
Training
Service
Calibration
Technical Support Articles
We buy!
Contact Us!
Main Page
Did you know...
We carry more than what is listed on these pages ?
Sign up for email lists:
Affiliate Program
///Motorsport

Agilent 6813B

Sorry!
No Product Photo


Agilent power source/analyzers are designed for applications which require precise control, accurate measurements, and analysis of single phase ac power. The feature set and performance levels of this product provide the flexibility necessary to power and test a wide variety of devices.

The 6813B is ideal for applications such as power supply testing, UPS testing, avionics ATE, the testing of power factor corrected equipment and devices, and compliance testing to regulatory standards.

Features:

  • ac and dc output capability
  • Compact single-phase
  • Power line disturbance simulation
  • Arbitrary waveform generation
  • High-accuracy measurements
  • Built-in harmonic analysis capability
  • Built-in GPIB and RS-232 interface with SCPI programming
  • VXI plug and play drivers
  • CE mark
  • Two current measurement ranges. Low range increases sensitivity 10:1
  • Regulatory Test-Ready: capable of compliance level CE mark testing with Regulatory Test Solution Software Modules
6813B Key Specifications
Output ratings (maximum) Phases: 1
Power: 1750 VA
rms Voltage: 300 V
Frequency: dc; 45 to 1000 Hz
rms Current: 13 A
Peak Current: 80 A
Non-repetitve peak current: 80 A
dc Power: 1350 W
dc Voltage: +/- 425 V
dc Current: 10 A
Crest Factor: 6
Constant Voltage Ripple and noise (20 kHz to 10 MHz) -60 dB (relative to full scale)
300 V rms
Maximum Total Harmonic Distortion 0.25% at 50/60 Hz
1% worst case (45 Hz to 1000 Hz)
Line regulation 0.1% of full scale
Load regulation 0.5% of full scale
Load Power Factor Capability 0-1
Supplemental Characteristics
Modes AC, DC, and AC+ DC
Fixed, Pulse, Step, and List
Waveshape (built-in) Sine, Square, Clipped Sine, and user defineable
Arbitrary Waveforms user definable, save up to 12 in non-volatile memory
Measurement Capability
(16 bit resolution system)		 rms Voltage, dc Voltage, ac + dc Voltage
rms Current, peak Current, Watts, VA, VAR
Frequency, THD, Power Factor, Crest Factor
Triggered acquisition of digitized voltage and current
Harmonic Analysis of V and I Returns amplitude, phase, and THD up to 50th harmonic
Instrument States save up to 16 states in non-volatile memory
Programmable Output Impedance Resistance: 0 to 1 ohm
Inductance: 20 uH to 1 mH
Output Relays Front panel control, bus programmable
Average Programming Resolution rms Voltage: 125 mV
dc Voltage: 250 mV
rms Current Limit: 4 mA
Peak Current Limit 25A
Overvoltage: 2 V
Output Frequency: 10 uH
Programmable Slew Rates
(avg prog resolution)		 ac Voltage Slew Rate (rms): 6 mV/s
dc Voltage Slew Rate: 20 mV/s
Frequency Slew Rate: 0.05 Hz/s
Output Voltage Risetime 50 Us (10% to 90% or 90% to 10%, resistive load)
Average Measurement Resolution rms Voltage: 10 mV
rms Current: 2 mA
Isolation to Ground 300 Vrms / 425 Vdc
Remote Sense up to 1 Vrms can be dropped on each load lead
Remote Inhibit Response Time <15 ms
Regulatory Compliance Listed to: UL 3111-1
Certified to: CSA 22.2 No. 1010-1
Conforms to: IEC 1010
RFI Supression Complies with: CISPR-11, Group 1, Class A
Input Ratings
Voltage range (Vac) 174 to 220 Vac (200/208 Vac nom.)
191 to 254 Vac (230 Vac nom.) - Factory default setting
Maximum input current (rms) 22 A (at 200/208 Vac)
20 A (at 230 Vac)
Input power (max) 3800 VA / 2600 W
Input frequency 47 to 63 Hz
Physical Specifications
Net Weight 32.7 kg (72 lb)
Shipping Weight 36.4 kg (80 lb)
Dimensions 425.5 mm W x 132.6 mm H x 574.7 D (16.75 in x 5.25 in x 22.6 in)

$ 895.00 per month to rent.
$ 9660.00 to purchase.
Rent It! Buy It!