The ten models in the Hughes 1177H Series of the Multi-Band Traveling-Wave Amplifiers, cover the 1.4 to 4 and 4 to 18 GHz frequency range with a minimum power output of 20 and 10 watts CW. The 1177H's light-weight compactness makes it ideal for either bench or 19-inch rack mounting. This size-weight feature is the result of the unique circuit design. These amplifiers have a wide variety of uses in such applications as EMI testing, antenna test patterns, communications, component testing, reflectometer systems and general laboratory requirements.
| RF Performance | ||
|---|---|---|
|
Model |
Frequency |
Power Output |
| 1177H15 |
8.0 - 18.0 GHz |
10 watts2,3 |
| 1177H05 |
2.5 - 4.0 GHz |
20 watts |
| 1177H06 |
4.0 - 10.5 GHz |
10 watts1 |
| 1177H07 |
6.5 - 13.5 GHz |
10 watts |
| 1177H08 |
10.5 - 18.0 GHz |
10 watts2,3 |
| 1177H10 |
1.4 - 2.4 GHz |
20 watts |
| 1177H13 |
3.0 - 8.0 GHz |
10 watts |
| 1177H14 |
5.0 - 10.0 GHz |
10 watts |
| 1177H16 |
3.9 - 11.7 GHz |
10 watts1 |
| 1177H17 |
7.0 - 16.5 GHz |
10 watts |
|
Electrical |
||
| Gain Rated Power Output : | 30 dB minimum1 | |
| Duty: | CW | |
| Input Voltage: | 120 VAC +/- 10% | |
| Input Frequency | 50/60 Hz | |
| Power Consumption: | 250 W | |
| Noise Figure: | 35 dB maximum | |
| Spurious Modulation (at saturation): | -50 dB minimum | |
| VSWR | 3:1 maximum | |
| 1. Models 1177H06 and 1177H16 refer to
typical performance curves for minimum gain and power output. 2. Model 1177H08 uses SMA or WR-62 waveguide with U/G-419/U flange as input and output connector, model 1177H15 uses SMA only. With waveguide output, RF performance will be degraded at low end of band. 3. Model 1177H08 and 1177H15 do not have an RF output interlock. |
||
Test Equipment
Corporation.For more information E-Mail sales@testeq.com or call (800)TEC-DOES.
Return to Test Equipment Corporation's Main Page